The self dubbed DIY queen of using what I have and making it work… we recently did a shiplap wall in our dining room/kitchen [that post is coming soon] and we had some extra wood. I made a post about our guest bathroom earlier when we added a wallpaper accent wall, but I felt the bathroom still needed a little more. Using the remainder of our DIY shiplap wood, we built a half board + batten wall. Follow along to see how we got this look for less!Continue reading
I’ve always wanted to do a fun wallpaper accent wall, but most of the walls in my house are textured. Whomp. We when we built the new house, our powder room came with a pedestal sink and boring construction grade fixtures and it was in dire need of an upgrade. I saw my opportunity and took it – the hardest part was convincing my husband!Continue reading
Our house was built in the 80’s and I don’t think our hall bathroom had been updated since then either. Every time I walked past it and saw the faux marbled sink, orangy wood vanity, pink rose linoleum with pink walls to match, I would shudder. When we first bought our house we updated almost every room except this bathroom. Money was tight from all the other updates so instead of a full overhaul, it was time to give it a face lift.
Here are some before pictures so you can relive the 80’s style in all its glory.
The first step was to take everything out! Since the vanity was in good condition I knew we could re-purpose it. We carefully removed the sink top and then the vanity. Next was the mirror, light and toilet. The wall cabinet was attached to the wall really well so we left it to just paint around. The tub/shower was in good condition and since this was just a facelift – it was saved from my sledgehammer. We then primed the vanity, wall cabinet and baseboards and painted the walls a lovely shade of tan. [we weren’t thinking of needing to see when we originally removed the light -ha!]
Now to tackle those
hideous dated floors. We decided on a large tan/grey and white glossy porcelain tile. We first installed the tile cement board and nailed down all the creaks. Then it was placing and cutting the tiles and adhering them to the floor. After many years of watching and helping my mom remodel her house and do tile – I had a general idea of how to. Just apply a generous amount of tile adhesive to the floor and mark ridges using the trowel. Do the same to the back of your tile and stick them together! Using spacers to allow room for grout and a level and more adhesive to keep things even. Once all your tile is in and set a day or two – apply your grout using a float and then a large sponge and water to wipe away the excess. Boom – beautiful tile.
Note – Keep a damp cloth over the hole for the toilet – this well help trap the odors a bit!
We then painted the vanity and cabinet a light Robin’s Egg Blue and reinstalled the vanity. We topped it with a pure white sink and new brushed silver faucet and hardware. We installed a new light fixture, white toilet, towel rod and other accessories. Our mirror isn’t pictured because it took us a while to find the right one… but I finally found a white framed mirror at TJMaxx.
Here is our updated 2010’s hall bathroom. We were able to complete the entire revamp for less than $500 and in about 4 days!